Fixed Oxygen Depletion Monitor with UK Plug - O₂NE+

Sold out

Available for next business day shipping*

Applications: Laboratories, Medical, Food & Beverage, Farming
What is it:Oxygen (O₂) Depletion Monitor
Single / Multi-Gas Detector:Single
What it measures:Oxygen (O₂)
Portable / Fixed: Fixed

O₂NE+, 18/19.5 - O2NE+ unlatched, quick connect, 230V AC UK.

The O₂NE+ is a simple to use and maintain ambient oxygen (O₂) depletion monitor and sensor for use in laboratories which use inert gases and nitrogen (N₂). It is essential to monitor oxygen (O₂) depletion levels in laboratories where gases like argon (Ar), helium (He) and nitrogen (N₂) are used.

Any laboratory using inert gases such as argon (Ar), xenon (Xe), nitrogen (N₂), krypton (Kr), radon (Rn) or helium (He) need to consider the O₂NE+ oxygen depletion monitor. This unique monitor will help you comply with applicable legislation for your laboratory.

Inert gases are used in laboratories to conduct experiments, in cryogenics and as carrier gases, but they do not support human breathing. Inert gases are odourless, colourless and tasteless, making them undetectable without an oxygen monitor.

How it works

The O₂NE+ is an ambient oxygen (O₂) depletion monitor comprising of a wall mounted main sensor unit and a repeater. It is ranged from 0 to 25% and has 2 low audio/visual alarms. The sensor has a very long life and calibration is only required every 12 months and can be achieved using certified air.

Where to install?

The O₂NE+ oxygen depletion monitor is usually situated in laboratories that are using multiple gases to ensure that oxygen (O₂) levels do not deteriorate to an unsafe level. The unit is also sometimes used in the gas storage area where there is potential for a leak of helium (He) or nitrogen (N₂).

The O₂NE+ is installed in areas where an inert gas is being used or stored to provide a warning should the oxygen (O₂) levels deteriorate to an unsafe level. The repeater is located at the entrance to the room, highlighting the danger to personnel before they enter.

Let us take care of you, so you can take care of them.

Saving lives and rapid crisis response is at the heart of what we do. We design our systems in a way which enables you to focus on the job at hand, delivering the best possible care for your patients.

Did you know?

Most competitor O₂ monitors have a 2 year sensor life. The O₂NE+ will last up to 7 years.**

*To quality for next business day shipping, your order must be placed by 2pm (GMT).

** 7 year life is based on:
25degC temp
1 atm (atmosphere pressure)
Exposure to 20.9 O2 in air
Differing environmental factors will alter the potential life span.

Product info

Long-life O₂ sensor
User changeable sensor
Calibration adjustment of the O₂NE+ can be completed using ‘pure air’
Repeater included
Plug and play
Not cross sensitive to helium (He)

Specifications

O₂ range: 0.1 to 25%
Sensor accuracy: better than ± 0.75% O₂ over 5.0 to 25.0% O₂
Response time (T90): <60 seconds
Operating temperature: 0 to +40 °C (+32 to +104 °F)
Temperature effect: 0.2% of reading/°C or 0.1115% of reading/ °F
Atmospheric pressure range: 811 to 1050 mbar absolute
Warm up time: 10 seconds to normal operation, prior to calibration allow 2 hours to achieve full accuracy
Dimensions: central unit = 175 x 105 x 75 mm, alarm repeater = 155 x 72 x 45 mm
Weight: central unit = 600g, alarm repeater = 150g
IP rating: IP65 for central unit and alarm repeater, unless the alarm repeater is quick connect then it is IP43
Sensor type: electrochemical cell
Sensor life: up to 7 years in air
Display: 4 digit LCD
Alarms: 2 x alarm visual indicators, 1 x system fault indicator, 1 x status indicator, common audible alarm
Alarm Sounder: min 75dBA
Relays: one or two optional alarm relays with changeover contacts assigned to alarm 1, alarm 2 or system fault.
Contact rating 240 V AC or 30 V DC at up to 2 A, contacts are non-latching fail-safe
Output: 2 wire, 4 to 20 mA (max load 150 Ω)
Power supply options: 210 to 250 V AC supply, 110 to 120 V AC supply, 9-24 V DC supply